Bornes escamotables, road blockers et barrières de sécurité

Road Blockers are designed to offer an impact-resistant barrier to vehicle access and are well suited to ‘High Security’ sites. Such installations may range from car parks through to anti-terrorist protection of defense sites. Whether the requirement is for a simple, low cost rising kerb for relatively low volume usage or a heavy-duty, anti-terrorist IWA 14/PAS 68 rated HVM (Hostile Vehicle Mitigation) road blocker for frequent operation, Frontier Pitts will supply a system designed to meet the individual sites exact needs. There are various options to consider when specifying your road blocker/rising kerb system.

The Automatic Rising Bollard is a retractable bollard, hydraulically powered barricade. Automatic Rising Bollards provide automated heavy-duty vehicle access control and protection against ram-raiding. These units bridge the gap between Automatic Barriers and Road Blockers in terms of security and cost.100% duty rating – Automatic Bollards are designed for continuous and frequent use. Power requirement is supplied from a single phase 230v supply. The Automatic Rising Bollards can be interfaced to any access control systems. Traffic Light System included as standard on all automatic bollard systems.

Controlling access of vehicles and persons has become ever more important in recent times. The Access barriers are complete, cost-oriented solutions for access controls at public car parks, company premises or other entranceways. Our seven models include the right solution for every use.

Road Trap creates a fast and safe transit environment by ensuring one-way traffic in vehicle entry-exit points of car parks, shopping centers, building complexes and similar areas. The purpose of this system is to prevent the passage of vehicles in opposite direction. This feature can be disabled when required. The vehicles acting contrary to the existing passage order are blocked by means of independent blades of Automatic Road Trap and thus, any assassination attempt can be prevented thanks to the damage give to the tires. The height of the blades is 7 cm but is possible to make production in special sizes depending on customer’s demand. The level of the noise arising from impact to these blades has been reduced with special rubber. Epoxy paint or electrostatic powder coat resistant to the external factor is used as the paint of the product due to our quality understanding. Furthermore, manual arm apparatus has been developed in order to be able to get 100% efficiency from the product in case of any power outage in Automatic Road Trap System.